AIO Configurator
Please select the inner slot module from the dropdown menu then select the outer slot module.
The C-module and T-modules must be in the outer slot.
AIO-A1
Designed for making basic acoustic measurements of a speaker or driver where up to 4 input channels are required (mic or line). Ideal for use with measurement microphones, ear simulators, artificial heads, speakers, actuators, and mouth simulators.
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
AIO-A2
Designed for making basic acoustic measurements of a soundbar, speaker or driver where up to 8 input channels are required (mic or line). Ideal for use with measurement microphones, ear simulators, artificial heads, speakers, actuators, and mouth simulators
MIC / LINE INPUTS
Eight low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Four 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
AIO-AL
Designed for situations where both electronic and basic acoustic measurements are required with up to 8 input channels (mic or line).
MIC / LINE INPUTS
Eight low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
LINE LEVEL OUTPUTS
Two balanced line level outputs with high dynamic range, low distortion, and low noise.
AIO-AS
MIC / LINE INPUTS
Six low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Four 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-AH
MIC / LINE INPUTS
Six low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
HEADPHONE OUTPUTS
Two high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-AC
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
BATTERY SIMULATOR
Variable +1 mV to +5 VDC supply can be programmatically controlled to simulate various battery conditions. Output current monitoring and an over-current shutdown
threshold are provided.
GPIO
Eight TTL-level GPIO inputs and eight GPIO outputs provide logic-level monitoring and control of DUTs, test fixtures, pass/fail lights, conveyers, switch closures, and other test devices. The open-drain outputs can sink up to 250 mA.
PTH SENSOR
Optional pressure, temperature, and humidity sensor for establishing environmental baseline measurements in manufacturing settings.
FIXED 5v SUPPLY
Fixed 5V DC power supply for powering test fixtures and DUTs.
AIO-AT
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
TDM I/O (10ch)
10 channels of TDM inputs and outputs. Supports 2ch (I²S), 4ch, and 8ch modes.
AIO-L1
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
LINE LEVEL OUTPUTS
Two balanced line level outputs with high dynamic range, low distortion, and low noise.
AIO-L2
MIC / LINE INPUTS
Eight low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
LINE LEVEL OUTPUTS
Four balanced line level outputs with high dynamic range, low distortion, and low noise.
AIO-LA
MIC / LINE INPUTS
Eight low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
LINE LEVEL OUTPUTS
Two balanced line level outputs with high dynamic range, low distortion, and low noise.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
AIO-LS
MIC / LINE INPUTS
Six low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
LINE LEVEL OUTPUTS
Two balanced line level outputs with high dynamic range, low distortion, and low noise.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-LH
MIC / LINE INPUTS
Six low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
LINE LEVEL OUTPUTS
Two balanced line level outputs with high dynamic range, low distortion, and low noise.
HEADPHONE OUTPUTS
Two high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-LC
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
LINE LEVEL OUTPUTS
Two balanced line level outputs with high dynamic range, low distortion, and low noise.
BATTERY SIMULATOR
Variable +1 mV to +5 VDC supply can be programmatically controlled to simulate various battery conditions. Output current monitoring and an over-current shutdown
threshold are provided.
GPIO
Eight TTL-level GPIO inputs and eight GPIO outputs provide logic-level monitoring and control of DUTs, test fixtures, pass/fail lights, conveyers, switch closures, and other test devices. The open-drain outputs can sink up to 250 mA.
PTH SENSOR
Optional pressure, temperature, and humidity sensor for establishing environmental baseline measurements in manufacturing settings.
FIXED 5v SUPPLY
Fixed 5V DC power supply for powering test fixtures and DUTs.
AIO-LT
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
LINE LEVEL OUTPUTS
Two balanced line level outputs with high dynamic range, low distortion, and low noise.
TDM I/O (10ch)
10 channels of TDM inputs and outputs. Supports 2ch (I²S), 4ch, and 8ch modes.
AIO-S1
MIC / LINE INPUTS
Two low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-S2
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Four 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
IMPEDANCE MEASUREMENT
Four additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-SL
MIC / LINE INPUTS
Six low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
LINE LEVEL OUTPUTS
Two balanced line level outputs with high dynamic range, low distortion, and low noise.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-SA
MIC / LINE INPUTS
Six low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Four 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-SH
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
HEADPHONE OUTPUTS
Two high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-SC
MIC / LINE INPUTS
Two low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
BATTERY SIMULATOR
Variable +1 mV to +5 VDC supply can be programmatically controlled to simulate various battery conditions. Output current monitoring and an over-current shutdown
threshold are provided.
GPIO
Eight TTL-level GPIO inputs and eight GPIO outputs provide logic-level monitoring and control of DUTs, test fixtures, pass/fail lights, conveyers, switch closures, and other test devices. The open-drain outputs can sink up to 250 mA.
PTH SENSOR
Optional pressure, temperature, and humidity sensor for establishing environmental baseline measurements in manufacturing settings.
FIXED 5v SUPPLY
Fixed 5V DC power supply for powering test fixtures and DUTs.
AIO-ST
MIC / LINE INPUTS
Two low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
TDM I/O (10ch)
10 channels of TDM inputs and outputs. Supports 2ch (I²S), 4ch, and 8ch modes.
AIO-H1
MIC / LINE INPUTS
Two low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
HEADPHONE OUTPUTS
Two high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-H2
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
HEADPHONE OUTPUTS
Four high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-HL
MIC / LINE INPUTS
Six low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
LINE LEVEL OUTPUTS
Two balanced line level outputs with high dynamic range, low distortion, and low noise.
HEADPHONE OUTPUTS
Two high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-HS
MIC / LINE INPUTS
Four low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
HEADPHONE OUTPUTS
Two high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-HA
MIC / LINE INPUTS
Six low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
AMPLIFIER OUTPUTS
Two 10w Class-D amplifier outputs for driving speakers, fixtures, and haptics actuators.
HEADPHONE OUTPUTS
Two high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
AIO-HC
MIC / LINE INPUTS
Two low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
HEADPHONE OUTPUTS
Two high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
BATTERY SIMULATOR
Variable +1 mV to +5 VDC supply can be programmatically controlled to simulate various battery conditions. Output current monitoring and an over-current shutdown
threshold are provided.
GPIO
Eight TTL-level GPIO inputs and eight GPIO outputs provide logic-level monitoring and control of DUTs, test fixtures, pass/fail lights, conveyers, switch closures, and other test devices. The open-drain outputs can sink up to 250 mA.
PTH SENSOR
Optional pressure, temperature, and humidity sensor for establishing environmental baseline measurements in manufacturing settings.
FIXED 5v SUPPLY
Fixed 5V DC power supply for powering test fixtures and DUTs.
AIO-HT
MIC / LINE INPUTS
Two low-noise inputs accommodate a very wide range of input voltages, from dynamic microphones to line-level inputs. Features include adjustable gain, constant current power, and TEDS readers.
HEADPHONE OUTPUTS
Two high-quality single-ended outputs optimized for driving wired headphones and earbuds. Both headphone outputs share a 0.1 Ohm sense resistor that can be switched to either output under program control.
IMPEDANCE MEASUREMENT
Two additional inputs are used to measure load impedance via the remote voltage sense terminals and internal sense resistors. These inputs appear as additional audio input channels and can be switched to measure either output channel via the AIO control panel, or the command-line or API interfaces.
TDM I/O (10ch)
10 channels of TDM inputs and outputs. Supports 2ch (I²S), 4ch, and 8ch modes.
AIO-T1
TDM I/O (10ch)
10 channels of TDM inputs and outputs. Supports 2ch (I²S), 4ch, and 8ch modes.
AIO-C1
BATTERY SIMULATOR
Variable +1 mV to +5 VDC supply can be programmatically controlled to simulate various battery conditions. Output current monitoring and an over-current shutdown
threshold are provided.
GPIO
Eight TTL-level GPIO inputs and eight GPIO outputs provide logic-level monitoring and control of DUTs, test fixtures, pass/fail lights, conveyers, switch closures, and other test devices. The open-drain outputs can sink up to 250 mA.
PTH SENSOR
Optional pressure, temperature, and humidity sensor for establishing environmental baseline measurements in manufacturing settings.
FIXED 5v SUPPLY
Fixed 5V DC power supply for powering test fixtures and DUTs.